Linear Algebra: Matrix algebra, systems of linear equations, eigen values and eigen vectors. Calculus: Functions of single variable, limit, continuity and differentiability, mean value theorems, evaluation of definite and improper integrals, partial derivatives, total derivative, maxima and minima, gradient, divergence and curl, vector identities, directional derivatives, line, surface and volume integrals. Theorems of Stokes, Gauss and Green.
Differential Calculus: First order linear and nonlinear equations, higher order linear ODEs with constant coefficients, Cauchy and Euler equations, initial and boundary value problems, Laplace transforms. Partial differential equations and separation of variables methods.
Numerical methods: Numerical solution of linear and nonlinear algebraic equations, integration by trapezoidal and Simpson rule, single and multi-step methods for differential equations.
Scorecard will be sent only to the qualified candidates. No information will be sent to candidates who are not qualified.
FLIGHT MECHANICS
Atmosphere: Properties, standard atmosphere. Classification of aircraft. Airplane (fixed wing aircraft) configuration and various parts.
Airplane performance: Pressure altitude; equivalent, calibrated, indicated air speeds; Primary flight instruments: Altimeter, ASI, VSI, Turn-bank indicator. Drag polar; take off and landing; steady climb & descent,-absolute and service ceiling; cruise, cruise climb, endurance or loiter; load factor, turning flight, V-n diagram; Winds: head, tail & cross winds.
Static stability: Angle of attack, sideslip; roll, pitch & yaw controls; longitudinal stick fixed & free stability, horizontal tail position and size; directional stability, vertical tail position and size; dihedral stability. Wing dihedral, sweep & position; hinge moments, stick forces.
Dynamic stability: Euler angles; Equations of motion; aerodynamic forces and moments, stability & control derivatives; decoupling of longitudinal and lat-directional dynamics; longitudinal modes; lateral-directional modes.
SPACE DYNAMICS
Central force motion, determination of trajectory and orbital period in simple cases. Orbit transfer, in-plane and out-of-plane. Elements of rocket motor performance.
AERODYNAMICS
Basic Fluid Mechanics: Incompressible irrotational flow, Helmholtz and Kelvin theorem, singularities and superposition, viscous flows, boundary layer on a flat plate.
Airfoils and wings: Classification of airfoils, aerodynamic characteristics, high lift devices, Kutta Joukowski theorem; lift generation; thin airfoil theory; wing theory; induced drag; qualitative treatment of low aspect ratio wings.
Viscous Flows: Flow separation, introduction to turbulence, transition, structure of a turbulent boundary layer.
Compressible Flows: Dynamics & Thermodynamics of I-D flow, isentropic flow, normal shock, oblique shock, Prandtl-Meyer flow, flow in nozzles and diffusers, inviscid flow in a c-d nozzle, flow in diffusers. subsonic and supersonic airfoils, compressibility effects on lift and drag, critical and drag divergence Mach number, wave drag.
Wind Tunnel Testing: Measurement and visualisation techniques.
STRUCTURES
Stress and Strain: Equations of equilibrium, constitutive law, strain-displacement relationship, compatibility equations, plane stress and strain, Airy’s stress function.
Flight Vehicle Structures: Characteristics of aircraft structures and materials, torsion, bending and flexural shear. Flexural shear flow in thin-walled sections. Buckling. Failure theories. Loads on aircraft.
Structural Dynamics: Free and forced vibration of discrete systems. Damping and resonance. Dynamics of continuous systems.
PROPULSION
Thermodynamics of Aircraft Gas Turbine engines, thrust and thrust augmentation.
Turbomachinery: Axial compressors and turbines, centrifugal pumps and compressors.
Aerothermodynamics of non rotating propulsion components: Intakes, combustor and nozzle. Thermodynamics of ramjets and scramjets. Elements of rocket propulsion.
| AG-Agricultural Engineering | |
| ENGINEERING MATHEMATICS Linear Algebra: Matrices and Determinants, Systems of linear equations, Eigen values and eigen vectors. Calculus: Limit, continuity and differentiability; Partial Derivatives; Maxima and minima; Sequences and series; Test for convergence; Fourier series. Vector Calculus: Gradient; Divergence and Curl; Line; surface and volume integrals; Stokes, Gauss and Green’s theorems. Differential Equations: Linear and non-linear first order ODEs; Higher order linear ODEs with constant coefficients; Cauchy’s and Euler’s equations; Laplace transforms; PDEs – Laplace, heat and wave equations. Probability and Statistics: Mean, median, mode and standard deviation; Random variables; Poisson, normal and binomial distributions; Correlation and regression analysis. Numerical Methods: Solutions of linear and non-linear algebraic equations; integration of trapezoidal and Simpson’s rule; single and multi-step methods for differential equations. FARM MACHINERY AND POWER Sources of power on the farm-human, animal, mechanical, electrical, wind, solar and biomass; bio-fuels; design and selection of machine elements – gears, pulleys, chains and sprockets and belts; overload safety devices used in farm machinery; measurement of force, torque, speed, displacement and acceleration on machine elements. Soil tillage; forces acting on a tillage tool; hitch systems and hitching of tillage implements; mechanics of animal traction; functional requirements, principles of working, construction and operation of manual, animal and power operated equipment for tillage, sowing, planting, fertilizer application, inter-cultivation, spraying, mowing, chaff cutting, harvesting, threshing and transport; testing of agricultural machinery and equipment; calculation of performance parameters -field capacity, efficiency, application rate and losses; cost analysis of implements and tractors Thermodynamic principles of I.C. engines; I.C. engine cycles; engine components; fuels and combustion; lubricants and their properties; I.C. engine systems – fuel, cooling, lubrication, ignition, electrical, intake and exhaust; selection, operation, maintenance and repair of I.C. engines; power efficiencies and measurement; calculation of power, torque, fuel consumption, heat load and power losses. Tractors and power tillers – type, selection, maintenance and repair; tractor clutches and brakes; power transmission systems – gear trains, differential, final drives and power take-off; mechanics of tractor chassis; traction theory; three point hitches- free link and restrained link operations; mechanical steering and hydraulic control systems used in tractors; human engineering and safety in tractor design; tractor tests and performance. SOIL AND WATER CONSERVATION ENGINEERING Ideal and real fluids, properties of fluids; hydrostatic pressure and its measurement; hydrostatic forces on plane and curved surface; continuity equation; Bernoulli’s theorem; laminar and turbulent flow in pipes, Darcy- Weisbach and Hazen-Williams equations, Moody’s diagram; flow through orifices and notches; flow in open channels. Engineering properties of soils; fundamental definitions and relationships; index properties of soils; permeability and seepage analysis; shear strength, Mohr’s circle of stress, active and passive earth pressures; stability of slopes. Hydrological cycle; meteorological parameters and their measurement, analysis of precipitation data; abstraction from precipitation; runoff; hydrograph analysis, unit hydrograph theory and application; stream flow measurement; flood routing, hydrological reservoir and channel routing. Measurement of distance and area; chain surveying, methods of traversing; measurement of angles and bearings, plane table surveying; types of levelling; contouring; instruments for surveying and levelling; computation of earth work. Mechanics of soil erosion, soil erosion types; wind and water erosion; factors affecting erosion; soil loss estimation; biological and engineering measures to control erosion; terraces and bunds; vegetative waterways; gully control structures, drop, drop inlet and chute spillways; earthen dams; water harvesting structures, farm ponds, watershed management. Soil-water-plant relationship, water requirement of crops; consumptive use and evapotranspiration; irrigation scheduling; irrigation efficiencies; design of irrigation channels; measurement of soil moisture, irrigation water and infiltration; surface, sprinkler and drip methods of irrigation; design and evaluation of irrigation methods. Drainage coefficient; planning, design and layout of surface and sub-surface drainage systems; leaching requirement and salinity control; irrigation and drainage water quality. Groundwater occurrence confined and unconfined aquifers, evaluation of aquifer properties; well hydraulics; groundwater recharge. Classification of pumps; pump characteristics; pump selection and installation. AGRICULTURAL PROCESSING AND FOOD ENGINEERING Steady state heat transfer in conduction, convection and radiation; transient heat transfer in simple geometry; condensation and boiling heat transfer; working principles of heat exchangers; diffusive and convective mass transfer; simultaneous heat and mass transfer in agricultural processing operations. Material and energy balances in food processing systems; water activity, sorption and desorption isotherms; centrifugal separation of solids, liquids and gases; kinetics of microbial death – pasteurization and sterilization of liquid foods; preservation of food by cooling and freezing; refrigeration and cold storage basics and applications; psychrometry – properties of air-vapour mixture; concentration and drying of liquid foods – evaporators, tray, drum and spray dryers. Mechanics and energy requirement in size reduction of granular solids; particle size analysis for comminuted solids; size separation by screening; fluidization of granular solids-pneumatic, bucket, screw and belt conveying; cleaning and grading; Effectiveness of grain cleaners. Hydrothermal treatment, drying and milling of cereals, pulses and oilseeds; Processing of seeds, spices, fruits and vegetables; By-product utilization from processing industries. Controlled and modified atmosphere storage; Perishable food storage, godowns, bins and grain silos.
|
| AR-Architecture and Planning |
| City planning: Evolution of cities; principles of city planning; types of cities & new towns; planning regulations and building byelaws; eco-city concept; sustainable development. Housing: Concept of housing; neighbourhood concept; site planning principles; housing typology; housing standards; housing infrastructure; housing policies, finance and management; housing programs in India; self help housing. Landscape Design: Principles of landscape design and site planning; history of landscape styles; landscape elements and materials; plant characteristics & planting design; environmental considerations in landscape planning. Computer Aided Design: Application of computers in architecture and planning; understanding elements of hardware and software; computer graphics; programming languages – C and Visual Basic and usage of packages such as AutoCAD, 3D-Studio, 3D Max. Environmental Studies in Building Science: Components of Ecosystem; ecological principles concerning environment; climate responsive design; energy efficient building design; thermal comfort; solar architecture; principles of lighting and styles for illumination; basic principles of architectural acoustics; environment pollution, their control & abatement. Visual and Urban Design: Principles of visual composition; proportion, scale, rhythm, symmetry, harmony, datum, balance, form, colour, texture; sense of place and space, division of space; barrier free design; focal point, vista, image ability, visual survey, figure-background relationship. History of Architecture: Indian – Indus valley, Vedic, Buddhist, Indo-Aryan, Dravidian and Mughal periods; European – Egyptian, Greek, Roman, medieval and renaissance periodsconstruction and architectural styles; vernacular and traditional architecture. Development of Contemporary Architecture: Architectural developments and impacts on society since industrial revolution; influence of modern art on architecture; works of national and international architects; art novuea, eclecticism, international styles, post modernism, deconstruction in architecture. Building Services: Water supply, sewerage and drainage systems; sanitary fittings and fixtures; plumbing systems, principles of internal & external drainage systems, principles of electrification of buildings, intelligent buildings; elevators & escalators, their standards and uses; airconditioning systems; fire fighting systems, building safety and security systems. Building Construction and Management: Building construction techniques, methods and details; building systems and prefabrication of building elements; principles of modular coordination; estimation, specification, valuation, professional practice; project management techniques e.g., PERT, CPM etc; Materials and Structural Systems: Behavioural characteristics of all types of building materials e.g. mud, timber, bamboo, brick, concrete, steel, glass, FRP, different polymers, composites; principles of strength of materials; design of structural elements in wood, steel and RCC; elastic and limit state design; complex structural systems; principles of pre-stressing; tall buildings; principles of disaster resistant structures. Planning Theory: Regional planning; settlement system planning; history of human settlements; growth of cities & metropolises; principles of Ekistics; rural-urban migration; urban conservation; urban renewal; Five-year plan; structural and sectoral plan. Techniques of Planning: Planning survey techniques; preparation of urban and regional structure plans, development plans, action plans; site planning principles and design; statistical methods of data analysis; application of G.I.S and remote sensing techniques in urban and regional planning; decision making models. Traffic and Transportation Planning: Principles of traffic engineering and transportation planning; traffic survey methods; design of roads, intersections, grade separators and parking areas; hierarchy of roads and levels of services; traffic and transport management in urban areas, intelligent transportation system; mass transportation planning; para-transits and other modes of transportation, pedestrian & slow moving traffic planning. Infrastructure, Services and Amenities: Principles of water supply and sanitation systems; water treatment; solid waste disposal systems; waste treatment, recycle & reuse; urban rainwater harvesting; power supply and communication systems — network, design & guidelines; demography related standards at various levels of the settlements for health, education, recreation, religious & public-semi public facilities. Development Administration and Management: Planning laws; development control and zoning regulations; laws relating to land acquisition; development enforcements, urban land ceiling; land management techniques; planning and municipal administration; disaster mitigation management; 73rd & 74th Constitutional amendments; valuation & taxation; revenue resources and fiscal management; public participation and role of NGO & CBO; Institutional networking & capacity building. |
| CE-Civil Engineering |
| ENGINEERING MATHEMATICS Linear Algebra: Matrix algebra, Systems of linear equations, Eigen values and eigenvectors. Calculus: Functions of single variable, Limit, continuity and differentiability, Mean value theorems, Evaluation of definite and improper integrals, Partial derivatives, Total derivative, Maxima and minima, Gradient, Divergence and Curl, Vector identities, Directional derivatives, Line, Surface and Volume integrals, Stokes, Gauss and Green’s theorems. Differential equations: First order equations (linear and nonlinear), Higher order linear differential equations with constant coefficients, Cauchy’s and Euler’s equations, Initial and boundary value problems, Laplace transforms, Solutions of one dimensional heat and wave equations and Laplace equation. Complex variables: Analytic functions, Cauchy’s integral theorem, Taylor and Laurent series. Probability and Statistics: Definitions of probability and sampling theorems, Conditional probability, Mean, median, mode and standard deviation, Random variables, Poisson, Normal and Binomial distributions. Numerical Methods: Numerical solutions of linear and non-linear algebraic equations Integration by trapezoidal and Simpson’s rule, single and multi-step methods for differential equations. STRUCTURAL ENGINEERING Mechanics: Bending moment and shear force in statically determinate beams. Simple stress and strain relationship: Stress and strain in two dimensions, principal stresses, stress transformation, Mohr’s circle. Simple bending theory, flexural and shear stresses, unsymmetrical bending, shear centre. Thin walled pressure vessels, uniform torsion, buckling of column, combined and direct bending stresses. Structural Analysis: Analysis of statically determinate trusses, arches, beams, cables and frames, displacements in statically determinate structures and analysis of statically indeterminate structures by force/ energy methods, analysis by displacement methods (slope deflection and moment distribution methods), influence lines for determinate and indeterminate structures. Basic concepts of matrix methods of structural analysis. Concrete Structures: Concrete Technology- properties of concrete, basics of mix design. Concrete design- basic working stress and limit state design concepts, analysis of ultimate load capacity and design of members subjected to flexure, shear, compression and torsion by limit state methods. Basic elements of prestressed concrete, analysis of beam sections at transfer and service loads. Steel Structures: Analysis and design of tension and compression members, beams and beamcolumns, column bases. Connections- simple and eccentric, beam–column connections, plate girders and trusses. Plastic analysis of beams and frames. GEOTECHNICAL ENGINEERING Soil Mechanics: Origin of soils, soil classification, three – phase system, fundamental definitions, relationship and interrelationships, permeability and seepage, effective stress principle, consolidation, compaction, shear strength. Foundation Engineering: Sub-surface investigations- scope, drilling bore holes, sampling, penetration tests, plate load test. Earth pressure theories, effect of water table, layered soils. Stability of slopes- infinite slopes, finite slopes. Foundation types- foundation design requirements. Shallow foundations- bearing capacity, effect of shape, water table and other factors, stress distribution, settlement analysis in sands and clays. Deep foundations – pile types, dynamic and static formulae, load capacity of piles in sands and clays, negative skin friction. WATER RESOURCES ENGINEERING Fluid Mechanics and Hydraulics: Properties of fluids, principle of conservation of mass, momentum, energy and corresponding equations, potential flow, applications of momentum and Bernoulli’s equation, laminar and turbulent flow, flow in pipes, pipe networks. Concept of boundary layer and its growth. Uniform flow, critical flow and gradually varied flow in channels, specific energy concept, hydraulic jump. Forces on immersed bodies, flow measurements in channels, tanks and pipes. Dimensional analysis and hydraulic modeling. Kinematics of flow, velocity triangles and specific speed of pumps and turbines. Hydrology: Hydrologic cycle, rainfall, evaporation, infiltration, stage discharge relationships, unit hydrographs, flood estimation, reservoir capacity, reservoir and channel routing. Well hydraulics. Irrigation: Duty, delta, estimation of evapo-transpiration. Crop water requirements. Design of: lined and unlined canals, waterways, head works, gravity dams and spillways. Design of weirs on permeable foundation. Types of irrigation system, irrigation methods. Water logging and drainage, sodic soils. ENVIRONMENTAL ENGINEERING Water requirements: Quality standards, basic unit processes and operations for water treatment. Drinking water standards, water requirements, basic unit operations and unit processes for surface water treatment, distribution of water. Sewage and sewerage treatment, quantity and characteristics of wastewater. Primary, secondary and tertiary treatment of wastewater, sludge disposal, effluent discharge standards. Domestic wastewater treatment, quantity of characteristics of domestic wastewater, primary and secondary treatment Unit operations and unit processes of domestic wastewater, sludge disposal. Air Pollution: Types of pollutants, their sources and impacts, air pollution meteorology, air pollution control, air quality standards and limits. Municipal Solid Wastes: Characteristics, generation, collection and transportation of solid wastes, engineered systems for solid waste management (reuse/ recycle, energy recovery, treatment and disposal). Noise Pollution: Impacts of noise, permissible limits of noise pollution, measurement of noise and control of noise pollution. TRANSPORTATION ENGINEERING Highway Planning: Geometric design of highways, testing and specifications of paving materials, design of flexible and rigid pavements. Traffic Engineering: Traffic characteristics, theory of traffic flow, intersection design, traffic signs and signal design, highway capacity. SURVEYING Importance of surveying, principles and classifications, mapping concepts, coordinate system, map projections, measurements of distance and directions, leveling, theodolite traversing, plane table surveying, errors and adjustments, curves.
|
CH-Chemical Engineering
Linear Algebra: Matrix algebra, Systems of linear equations, Eigen values and eigenvectors.
Calculus: Functions of single variable, Limit, continuity and differentiability, Mean value theorems, Evaluation of definite and improper integrals, Partial derivatives, Total derivative, Maxima and minima, Gradient, Divergence and Curl, Vector dentities, Directional derivatives, Line, Surface and Volume integrals, Stokes, Gauss and Green’s theorems.
Differential equations: First order equations (linear and nonlinear), Higher order linear differential equations with constant coefficients, Cauchy’s and Euler’s equations, Initial and boundary value problems, Laplace transforms, Solutions of one dimensional heat and wave equations and Laplace equation.
Complex variables: Analytic functions, Cauchy’s integral theorem, Taylor and Laurent series, Residue theorem.
Probability and Statistics: Definitions of probability and sampling theorems, Conditional probability, Mean, median, mode and standard deviation, Random variables, Poisson, Normal and Binomial distributions.
Numerical Methods: Numerical solutions of linear and non-linear algebraic equations Integration by trapezoidal and Simpson’s rule, single and multi-step methods for differential equations.
CHEMICAL ENGINEERING
Process Calculations and Thermodynamics: Laws of conservation of mass and energy; use of tie components; recycle, bypass and purge calculations; degree of freedom analysis. First and Second laws of thermodynamics. First law application to close and open systems. Second law and Entropy Thermodynamic properties of pure substances: equation of state and departure function, properties of mixtures: partial molar properties, fugacity, excess properties and activity coefficients; phase equilibria: predicting VLE of systems; chemical reaction equilibria
Fluid Mechanics and Mechanical Operations: Fluid statics, Newtonian and non-Newtonian fluids, Bernoulli equation, Macroscopic friction factors, energy balance, dimensional analysis, shell balances, flow through pipeline systems, flow meters, pumps and compressors, packed and fluidized beds, elementary boundary layer theory, size reduction and size separation; free and hindered settling; centrifuge and cyclones; thickening and classification, filtration, mixing and agitation; conveying of solids.
Heat Transfer: Conduction, convection and radiation, heat transfer coefficients, steady and unsteady heat conduction, boiling, condensation and evaporation; types of heat exchangers and evaporators and their design.
Mass Transfer: Fick’s laws, molecular diffusion in fluids, mass transfer coefficients, film, penetration and surface renewal theories; momentum, heat and mass transfer analogies; stagewise and continuous contacting and stage efficiencies; HTU & NTU concepts design and operation of equipment for distillation, absorption, leaching, liquid-liquid extraction, drying, humidification, dehumidification and adsorption.
Chemical Reaction Engineering: Theories of reaction rates; kinetics of homogeneous reactions, interpretation of kinetic data, single and multiple reactions in ideal reactors, non-ideal reactors; residence time distribution, single parameter model; non-isothermal reactors; kinetics of heterogeneous catalytic reactions; diffusion effects in catalysis.
Instrumentation and Process Control: Measurement of process variables; sensors, transducers and their dynamics, transfer functions and dynamic responses of simple systems, process reaction curve, controller modes (P, PI, and PID); control valves; analysis of closed loop systems including stability, frequency response and controller tuning, cascade, feed forward control.
Plant Design and Economics: Process design and sizing of chemical engineering equipment such as compressors, heat exchangers, multistage contactors; principles of process economics and cost estimation including total annualized cost, cost indexes, rate of return, payback period, discounted cash flow, optimization in design.
Chemical Technology: Inorganic chemical industries; sulfuric acid, NaOH, fertilizers (Ammonia, Urea, SSP and TSP); natural products industries (Pulp and Paper, Sugar, Oil, and Fats); petroleum refining and petrochemicals; polymerization industries; polyethylene, polypropylene, PVC and polyester synthetic fibers.
| CS-Computer Science and Engineering |
| ENGINEERING MATHEMATICS Mathematical Logic: Propositional Logic; First Order Logic. Probability: Conditional Probability; Mean, Median, Mode and Standard Deviation; Random Variables; Distributions; uniform, normal, exponential, Poisson, Binomial. Set Theory & Algebra: Sets; Relations; Functions; Groups; Partial Orders; Lattice; Boolean Algebra. Combinatorics: Permutations; Combinations; Counting; Summation; generating functions; recurrence relations; asymptotics. Graph Theory: Connectivity; spanning trees; Cut vertices & edges; covering; matching; independent sets; Colouring; Planarity; Isomorphism. Linear Algebra: Algebra of matrices, determinants, systems of linear equations, Eigen values and Eigen vectors. Numerical Methods: LU decomposition for systems of linear equations; numerical solutions of non-linear algebraic equations by Secant, Bisection and Newton-Raphson Methods; Numerical integration by trapezoidal and Simpson’s rules. Calculus: Limit, Continuity & differentiability, Mean value Theorems, Theorems of integral calculus, evaluation of definite & improper integrals, Partial derivatives, Total derivatives, maxima & minima. COMPUTER SCIENCE AND ENGINEERING Theory of Computation: Regular languages and finite automata, Context free languages and Push-down automata, Recursively enumerable sets and Turing machines, Undecidability; NPcompleteness. Digital Logic: Logic functions, Minimization, Design and synthesis of combinational and sequential circuits; Number representation and computer arithmetic (fixed and floating point). Computer Organization and Architecture: Machine instructions and addressing modes, ALU and data-path, CPU control design, Memory interface, I/O interface (Interrupt and DMA mode), Instruction pipelining, Cache and main memory, Secondary storage. Programming and Data Structures: Programming in C; Functions, Recursion, Parameter passing, Scope, Binding; Abstract data types, Arrays, Stacks, Queues, Linked Lists, Trees, Binary search trees, Binary heaps. Algorithms: Analysis, Asymptotic notation, Notions of space and time complexity, Worst and average case analysis; Design: Greedy approach, Dynamic programming, Divide-and-conquer; Tree and graph traversals, Connected components, Spanning trees, Shortest paths; Hashing, Sorting, Searching. Compiler Design: Lexical analysis, Parsing, Syntax directed translation, Runtime environments, Intermediate and target code generation, Basics of code optimization. Operating System: Processes, Threads, Inter-process communication, Concurrency, Synchronization, Deadlock, CPU scheduling, Memory management and virtual memory, File systems, I/O systems, Protection and security. Databases: ER-model, Relational model (relational algebra, tuple calculus), Database design (integrity constraints, normal forms), Query languages (SQL), File structures (sequential files, indexing, B and B+ trees), Transactions and concurrency control. Computer Networks: ISO/OSI stack, LAN technologies (Ethernet, Token ring), Flow and error control techniques, Routing algorithms, Congestion control, TCP/UDP and sockets, IP(v4), Application layer protocols (icmp, dns, smtp, pop, ftp, http); Basic concepts of hubs, switches, gateways, and routers.
|
| CY-Chemistry |
| PHYSICAL CHEMISTRY Structure: Quantum theory: principles and techniques; applications to a particle in a box, harmonic oscillator, rigid rotor and hydrogen atom; valence bond and molecular orbital theories, Huckel approximation; approximate techniques: variation and perturbation; symmetry, point groups; rotational, vibrational, electronic, NMR, and ESR spectroscopy Equilibrium: Kinetic theory of gases; First law of thermodynamics, heat, energy, and work; second law of thermodynamics and entropy; third law and absolute entropy; free energy; partial molar quantities; ideal and non-ideal solutions; phase transformation: phase rule and phase diagrams – one, two, and three component systems; activity, activity coefficient, fugacity, and fugacity coefficient; chemical equilibrium, response of chemical equilibrium to temperature and pressure; colligative properties; Debye-Huckel theory; thermodynamics of electrochemical cells; standard electrode potentials: applications – corrosion and energy conversion; molecular partition function (translational, rotational, vibrational, and electronic). Kinetics: Rates of chemical reactions, temperature dependence of chemical reactions; elementary, consecutive, and parallel reactions; steady state approximation; theories of reaction rates – collision and transition state theory, relaxation kinetics, kinetics of photochemical reactions and free radical polymerization, homogeneous catalysis, adsorption isotherms and heterogeneous catalysis. INORGANIC CHEMISTRY Main group elements: General characteristics, allotropes, structure and reactions of simple and industrially important compounds: boranes, carboranes, silicones, silicates, boron nitride, borazines and phosphazenes. Hydrides, oxides and oxoacids of pnictogens (N, P), chalcogens (S, Se & Te) and halogens, xenon compounds, pseudo halogens and interhalogen compounds. Shapes of molecules and hard- soft acid base concept. Structure and Bonding (VBT) of B, Al, Si, N, P, S, Cl compounds. Allotropes of carbon: graphite, diamond, C60. Synthesis and reactivity of inorganic polymers of Si and P. Transition Elements: General characteristics of d and f block elements; coordination chemistry: structure and isomerism, stability, theories of metal- ligand bonding (CFT and LFT), mechanisms of substitution and electron transfer reactions of coordination complexes. Electronic spectra and magnetic properties of transition metal complexes, lanthanides and actinides. Metal carbonyls, metal- metal bonds and metal atom clusters, metallocenes; transition metal complexes with bonds to hydrogen, alkyls, alkenes and arenes; metal carbenes; use of organometallic compounds as catalysts in organic synthesis. Bioinorganic chemistry of Na, K. Mg, Ca, Fe, Co, Zn, Cu and Mo. Solids: Crystal systems and lattices, miller planes, crystal packing, crystal defects; Braggfs Law, ionic crystals, band theory, metals and semiconductors, Different structures of AX, AX2, ABX3 compounds, spinels. Instrumental methods of analysis: Atomic absorption and emission spectroscopy including ICP-AES, UV- visible spectrophotometry, NMR, mass, Mossbauer spectroscopy (Fe and Sn), ESR spectroscopy, chromatography including GC and HPLC and electro-analytical methods (Coulometry, cyclic voltammetry, polarography . amperometry, and ion selective electrodes). ORGANIC CHEMISTRY Stereochemistry: Chirality of organic molecules with or without chiral centres. Specification of configuration in compounds having one or more stereogenic centres. Enantiotopic and diastereotopic atoms, groups and faces. Stereoselective and stereospecific synthesis. Conformational analysis of acyclic and cyclic compounds. Geometrical isomerism. Configurational and conformational effects on reactivity and selectivity/specificity. Reaction mechanism: Methods of determining reaction mechanisms. Nucleophilic and electrophilic substitutions and additions to multiple bonds. Elimination reactions. Reactive intermediates- carbocations, carbanions, carbenes, nitrenes, arynes, free radicals. Molecular rearrangements involving electron deficient atoms. Organic synthesis: Synthesis, reactions, mechanisms and selectivity involving the followingalkenes, alkynes, arenes, alcohols, phenols, aldehydes, ketones, carboxylic acids and their derivatives, halides, nitro compounds and amines. Use of compounds of Mg, Li, Cu, B and Si in organic synthesis. Concepts in multistep synthesis- retrosynthetic analysis, disconnections, synthons, synthetic equivalents, reactivity umpolung, selectivity, protection and deprotection of functional groups. Pericyclic reactions: Electrocyclic, cycloaddition and sigmatropic reactions. Orbital correlation, FMO and PMO treatments. Photochemistry: Basic principles. Photochemistry of alkenes, carbonyl compounds, and arenes. Photooxidation and photoreduction. Di-ƒÎ- methane rearrangement, Barton reaction. Heterocyclic compounds: Structure, preparation, properties and reactions of furan, pyrrole, thiophene, pyridine, indole and their derivatives. Biomolecules: Structure, properties and reactions of mono- and di-saccharides, physicochemical properties of amino acids, chemical synthesis of peptides, structural features of proteins, nucleic acids, steroids, terpenoids, carotenoids, and alkaloids. Spectroscopy: Principles and applications of UV-visible, IR, NMR and Mass spectrometry in the determination of structures of organic molecules.
|
| EC-Electronics and Communication Engineering |
| ENGINEERING MATHEMATICS Linear Algebra: Matrix Algebra, Systems of linear equations, Eigen values and eigen vectors. Calculus: Mean value theorems, Theorems of integral calculus, Evaluation of definite and improper integrals, Partial Derivatives, Maxima and minima, Multiple integrals, Fourier series. Vector identities, Directional derivatives, Line, Surface and Volume integrals, Stokes, Gauss and Green’s theorems. Differential equations: First order equation (linear and nonlinear), Higher order linear differential equations with constant coefficients, Method of variation of parameters, Cauchy’s and Euler’s equations, Initial and boundary value problems, Partial Differential Equations and variable separable method. Complex variables: Analytic functions, Cauchy’s integral theorem and integral formula, Taylor’s and Laurent’ series, Residue theorem, solution integrals. Probability and Statistics: Sampling theorems, Conditional probability, Mean, median, mode and standard deviation, Random variables, Discrete and continuous distributions, Poisson, Normal and Binomial distribution, Correlation and regression analysis. Numerical Methods: Solutions of non-linear algebraic equations, single and multi-step methods for differential equations. Transform Theory: Fourier transform, Laplace transform, Z-transform. ELECTRONICS AND COMMUNICATION ENGINEERING Networks: Network graphs: matrices associated with graphs; incidence, fundamental cut set and fundamental circuit matrices. Solution methods: nodal and mesh analysis. Network theorems: superposition, Thevenin and Norton’s maximum power transfer, Wye-Delta transformation. Steady state sinusoidal analysis using phasors. Linear constant coefficient differential equations; time domain analysis of simple RLC circuits, Solution of network equations using Laplace transform: frequency domain analysis of RLC circuits. 2-port network parameters: driving point and transfer functions. State equations for networks. Electronic Devices: Energy bands in silicon, intrinsic and extrinsic silicon. Carrier transport in silicon: diffusion current, drift current, mobility, and resistivity. Generation and recombination of carriers. p-n junction diode, Zener diode, tunnel diode, BJT, JFET, MOS capacitor, MOSFET, LED, p-I-n and avalanche photo diode, Basics of LASERs. Device technology: integrated circuits fabrication process, oxidation, diffusion, ion implantation, photolithography, n-tub, p-tub and twintub CMOS process. Analog Circuits: Small Signal Equivalent circuits of diodes, BJTs, MOSFETs and analog CMOS. Simple diode circuits, clipping, clamping, rectifier. Biasing and bias stability of transistor and FET amplifiers. Amplifiers: single-and multi-stage, differential and operational, feedback, and power. Frequency response of amplifiers. Simple op-amp circuits. Filters. Sinusoidal oscillators; criterion for oscillation; single-transistor and op-amp configurations. Function generators and waveshaping circuits, 555 Timers. Power supplies. Digital circuits: Boolean algebra, minimization of Boolean functions; logic gates; digital IC families (DTL, TTL, ECL, MOS, CMOS). Combinatorial circuits: arithmetic circuits, code converters, multiplexers, decoders, PROMs and PLAs. Sequential circuits: latches and flip-flops, counters and shift-registers. Sample and hold circuits, ADCs, DACs. Semiconductor memories. Microprocessor(8085): architecture, programming, memory and I/O interfacing. Signals and Systems: Definitions and properties of Laplace transform, continuous-time and discrete-time Fourier series, continuous-time and discrete-time Fourier Transform, DFT and FFT, z-transform. Sampling theorem. Linear Time-Invariant (LTI) Systems: definitions and properties; causality, stability, impulse response, convolution, poles and zeros, parallel and cascade structure, frequency response, group delay, phase delay. Signal transmission through LTI systems. Control Systems: Basic control system components; block diagrammatic description, reduction of block diagrams. Open loop and closed loop (feedback) systems and stability analysis of these systems. Signal flow graphs and their use in determining transfer functions of systems; transient and steady state analysis of LTI control systems and frequency response. Tools and techniques for LTI control system analysis: root loci, Routh-Hurwitz criterion, Bode and Nyquist plots. Control system compensators: elements of lead and lag compensation, elements of Proportional-Integral- Derivative (PID) control. State variable representation and solution of state equation of LTI control systems. Communications: Random signals and noise: probability, random variables, probability density function, autocorrelation, power spectral density. Analog communication systems: amplitude and angle modulation and demodulation systems, spectral analysis of these operations, superheterodyne receivers; elements of hardware, realizations of analog communication systems; signal-to-noise ratio (SNR) calculations for amplitude modulation (AM) and frequency modulation (FM) for low noise conditions. Fundamentals of information theory and channel capacity theorem. Digital communication systems: pulse code modulation (PCM), differential pulse code modulation (DPCM), digital modulation schemes: amplitude, phase and frequency shift keying schemes (ASK, PSK, FSK), matched filter receivers, bandwidth consideration and probability of error calculations for these schemes. Basics of TDMA, FDMA and CDMA and GSM. Electromagnetics: Elements of vector calculus: divergence and curl; Gauss’ and Stokes’ theorems, Maxwell’s equations: differential and integral forms. Wave equation, Poynting vector. Plane waves: propagation through various media; reflection and refraction; phase and group velocity; skin depth. Transmission lines: characteristic impedance; impedance transformation; Smith chart; impedance matching; S parameters, pulse excitation. Waveguides: modes in rectangular waveguides; boundary conditions; cut-off frequencies; dispersion relations. Basics of propagation in dielectric waveguide and optical fibers. Basics of Antennas: Dipole antennas; radiation pattern; antenna gain.
|
| GG-Geology And Geo-Physics |
| PART – I Earth and Planetary system; size, shape, internal structure and composition of the earth; atmosphere and greenhouse effect; isostasy; elements of seismology; pressure in deep interior of planets; continents and continental processes; physical oceanography; paleomagnetism, continental drift, plate tectonics. Weathering; soil formation; action of river, wind and glacier; oceans and oceanic features; earthquakes, volcanoes, orogeny and mountain building; elements of structural geology; crystallography; classification, composition and properties of minerals; elements of petrology; engineering properties of rocks and soils, role of geology in the construction of engineering structures. Introductory processes of ore formation, broad occurrence and distribution of ore deposits; coal and petroleum resources in India; ground water geology geological time scale and geochronology; stratigraphic principles and stratigraphy of India; basic concepts of gravity, magnetic and electrical prospecting for ores and ground water. PART – IIA: GEOLOGY Crystal symmetry, forms, twinning; crystal chemistry; optical mineralogy, classification of minerals, diagnostic physical and optical properties of rock forming minerals. Igneous rocks – classification, forms and textures, magmatic differentiation; phase diagrams and trace elements as monitors of magma evolutionary processes; mantle melting models and derivation of primary magmas. Metamorphism: controlling factors, metamorphic facies, grade and baric types; metamorphism of pelitic, mafic and impure carbonate rocks; role of fluids in metamorphism; metamorphic P-T-t paths and their tectonic significance; Igneous and metamorphic provinces of India; structure and petrology of sedimentary rocks; sedimentary processes and environments, sedimentary facies, basin studies; association of igneous, sedimentary and metamorphic rocks with tectonic setting. Stress, strain and material response; brittle and ductile deformation; primary and secondary structures; geometry and genesis of folds, faults, joints, unconformities; cleavage, schistosity and lineation; methods of projection, tectonites and their significance; shear zone; superposed folding; basement cover relationship. Morphology, classification and geological significance of important invertebrates, vertebrates, microfossils and palaeoflora; stratigraphic principles and Indian stratigraphy; geomorphic processes and agents; development and evolution of landforms; slope and drainage; processes on deep oceanic and near-shore regions; quantitative and applied geomorphology; air photo interpretation and remote sensing; ore mineralogy and optical properties of ore minerals; ore forming processes vis-à-vis ore-rock association (magmatic, hydrothermal, sedimentary and metamorphogenic ores); ores and metamorphism; fluid inclusions as an ore genetic tool; prospecting and exploration of economic minerals; sampling, ore reserve estimation, mining methods; coal and petroleum geology; origin and distribution of mineral and fuel deposits in India; marine geology and ocean resources; ore dressing and mineral economics. Cosmic abundance; meteorites; geochemical evolution of the earth; geochemical cycles; distribution of major, minor and trace elements; elements of geochemical thermodynamics, isotope geochemistry; geochemistry of waters including solution equilibria and water rock interaction. Engineering properties of rocks and soils; rocks as construction material; geology of dams; tunnels and excavation sites; natural hazards; ground water geology and exploration and well hydraulics; water quality; basic principles of remote sensing – energy sources and radiation principles, atmospheric absorption, interaction of energy with various features of the earth’s surface. GIS – basic concepts, raster and vector mode operation, digital processing of satellite images, visual and microwave remote sensing; elements of Geostatistics PART – II B: GEOPHYSICS The earth as a planet; different motions of the earth; gravity field of the earth and its shape; geochronology; seismology and interior of the earth; variation of density, velocity, pressure, temperature, electrical and magnetic properties of the earth; earthquakes-causes and measurements; magnitude and intensity, focal mechanisms, earthquake quantification, source characteristics, seismotectonics and seismic hazards; digital seismographs, paleoseismology, geomagnetic field, paleomagnetism; oceanic and continental lithosphere; plate tectonics; heat flow; upper and lower atmospheric phenomena. Theories of scalar and vector potential fields; Laplace, Maxwell and Helmholtz equations for solution of different types of boundary value problems in Cartesian, cylindrical and spherical polar coordinates; Green’s theorem; Image theory; integral equations and conformal transformations in potential theory; Eikonal equation and Ray theory. ‘G’ and ‘g’ units of measurement, density of rocks, gravimeters, Bouguer gravity formula, various corrections to gravity data, free air, Bouguer and isostatic anomalies, regional and residual gravity separation, upward and downward continuation, preparation and analysis of gravity maps; gravity anomalies and their interpretation; calculation of mass, airborne, shipborne and bore-hole gravity surveys. Earth’s magnetic field, units of measurement, magnetic susceptibility of rocks, magnetometers, corrections, preparation of magnetic maps, upward and downward continuation, magnetic anomalies and their interpretation; magnetic anomalies and their interpretation. Conduction of electricity through rocks, electrical conductivities of metals, metallic, non-metallic and rock forming minerals, D.C. resistivity units and methods of measurement, electrode configuration for sounding and profiling, application of filter theory, interpretation of resistivity field data, application; self potential origin, classification, field measurement, interpretation of induced polarization time frequency, phase domain; IP units and methods of measurement, interpretation and application; ground-water exploration. Origin of electromagnetic field, elliptic polarization, methods of measurement for different sourcereceiver configuration components in EM measurements, skin-depth, interpretation and applications; earth’s natural electromagnetic field, tellurics, magneto-tellurics; geomagnetic depth sounding principles, electromagnetic profiling, methods of measurement, processing of data and interpretation. Seismic methods of prospecting: Reflection, refraction and CDP surveys; land and marine seismic sources, generation and propagation of elastic waves, velocity increasing with depth, geophones, hydrophones, recording instruments (DFS), digital formats, field layouts, seismic noises and noise profile analysis, optimum geophone grouping, noise cancellation by shot and geophone arrays, 2D and 3D seismic data acquisition, processing and interpretation; CDP stacking charts, binning, filtering, dip-moveout, static and dynamic corrections, migration, signal processing, attribute analysis, bright and dim spots, seismic stratigraphy, high resolution seismics, VSP, AVO. Principles and techniques of geophysical well-logging, SP, resistivity, induction, gamma ray, neutron, density, sonic, temperature, dip meter, caliper, nuclear magnetic, cement bond logging, micro-logs. Quantitative evaluation of formations from well logs; well hydraulics and application of geophysical methods for groundwater study; application of bore hole geophysics in ground water, mineral and oil exploration. Radioactive methods of prospecting and assaying of minerals (radioactive and non radioactive) deposits, half-life, decay constant, radioactive equilibrium, G M counter, scintillation detector, semiconductor devices, application of radiometric for exploration and radioactive waste disposal. Geophysical signal processing, sampling theorem, aliasing, Nyquist frequency, Fourier series, periodic waveform, Fourier and Hilbert transform, Z-transform, power spectrum, delta function, auto correlation, cross correlation, convolution, deconvolution, principles of digital filters, windows, poles and zeros. Geophysical inverse problems: non-uniqueness and stability of solutions; quasi-linear and nonlinear methods including genetic algorithms and artificial neural network.
|
| IN-Instrumentation Engineering |
| ENGINEERING MATHEMATICS Linear Algebra: Matrix Algebra, Systems of linear equations, Eigen values and eigen vectors. Calculus: Mean value theorems, Theorems of integral calculus, Evaluation of definite and improper integrals, Partial Derivatives, Maxima and minima, Multiple integrals, Fourier series. Vector identities, Directional derivatives, Line, Surface and Volume integrals, Stokes, Gauss and Green’s theorems. Differential equations: First order equation (linear and nonlinear), Higher order linear differential equations with constant coefficients, Method of variation of parameters, Cauchy’s and Euler’s equations, Initial and boundary value problems, Partial Differential Equations and variable separable method. Complex variables: Analytic functions, Cauchy’s integral theorem and integral formula, Taylor’s and Laurent’ series, Residue theorem, solution integrals. Probability and Statistics: Sampling theorems, Conditional probability, Mean, median, mode and standard deviation, Random variables, Discrete and continuous distributions, Poisson, Normal and Binomial distribution, Correlation and regression analysis. Numerical Methods: Solutions of non-linear algebraic equations, single and multi-step methods for differential equations. Transform Theory: Fourier transform, Laplace transform, Z-transform. INSTRUMENTATION ENGINEERING Basics of Circuits and Measurement Systems: Kirchoff’s laws, mesh and nodal Analysis. Circuit theorems. One-port and two-port Network Functions. Static and dynamic characteristics of Measurement Systems. Error and uncertainty analysis. Statistical analysis of data and curve fitting. Transducers, Mechanical Measurement and Industrial Instrumentation: Resistive, Capacitive, Inductive and piezoelectric transducers and their signal conditioning. Measurement of displacement, velocity and acceleration (translational and rotational), force, torque, vibration and shock. Measurement of pressure, flow, temperature and liquid level. Measurement of pH, conductivity, viscosity and humidity. Analog Electronics: Characteristics of diode, BJT, JFET and MOSFET. Diode circuits. Transistors at low and high frequencies, Amplifiers, single and multi-stage. Feedback amplifiers. Operational amplifiers, characteristics and circuit configurations. Instrumentation amplifier. Precision rectifier. V-to-I and I-to-V converter. Op-Amp based active filters. Oscillators and signal generators. Digital Electronics: Combinational logic circuits, minimization of Boolean functions. IC families, TTL, MOS and CMOS. Arithmetic circuits. Comparators, Schmitt trigger, timers and mono-stable multi-vibrator. Sequential circuits, flip-flops, counters, shift registers. Multiplexer, S/H circuit. Analog-to-Digital and Digital-to-Analog converters. Basics of number system. Microprocessor applications, memory and input-output interfacing. Microcontrollers. Signals, Systems and Communications: Periodic and aperiodic signals. Impulse response, transfer function and frequency response of first- and second order systems. Convolution, correlation and characteristics of linear time invariant systems. Discrete time system, impulse and frequency response. Pulse transfer function. IIR and FIR filters. Amplitude and frequency modulation and demodulation. Sampling theorem, pulse code modulation. Frequency and time division multiplexing. Amplitude shift keying, frequency shift keying and pulse shift keying for digital modulation. Electrical and Electronic Measurements: Bridges and potentiometers, measurement of R,L and C. Measurements of voltage, current, power, power factor and energy. A.C & D.C current probes. Extension of instrument ranges. Q-meter and waveform analyzer. Digital voltmeter and multi-meter. Time, phase and frequency measurements. Cathode ray oscilloscope. Serial and parallel communication. Shielding and grounding. Control Systems and Process Control: Feedback principles. Signal flow graphs. Transient Response, steady-state-errors. Routh and Nyquist criteria. Bode plot, root loci. Time delay systems. Phase and gain margin. State space representation of systems. Mechanical, hydraulic and pneumatic system components. Synchro pair, servo and step motors. On-off, cascade, P, PI, P-I-D, feed forward and derivative controller, Fuzzy controllers. Analytical, Optical and Biomedical Instrumentation: Mass spectrometry. UV, visible and IR spectrometry. X-ray and nuclear radiation measurements. Optical sources and detectors, LED, laser, Photo-diode, photo-resistor and their characteristics. Interferometers, applications in metrology. Basics of fiber optics. Biomedical instruments, EEG, ECG and EMG. Clinical measurements. Ultrasonic transducers and Ultrasonography. Principles of Computer Assisted Tomography.
|
| MA-Mathematics |
| Linear Algebra: Finite dimensional vector spaces; Linear transformations and their matrix representations, rank; systems of linear equations, eigen values and eigen vectors, minimal polynomial, Cayley-Hamilton Theroem, diagonalisation, Hermitian, Skew-Hermitian and unitary matrices; Finite dimensional inner product spaces, Gram-Schmidt orthonormalization process, self-adjoint operators. Complex Analysis: Analytic functions, conformal mappings, bilinear transformations; complex integration: Cauchy’s integral theorem and formula; Liouville’s theorem, maximum modulus principle; Taylor and Laurent’s series; residue theorem and applications for evaluating real integrals. Real Analysis: Sequences and series of functions, uniform convergence, power series, Fourier series, functions of several variables, maxima, minima; Riemann integration, multiple integrals, line, surface and volume integrals, theorems of Green, Stokes and Gauss; metric spaces, completeness, Weierstrass approximation theorem, compactness; Lebesgue measure, measurable functions; Lebesgue integral, Fatou’s lemma, dominated convergence theorem. Ordinary Differential Equations: First order ordinary differential equations, existence and uniqueness theorems, systems of linear first order ordinary differential equations, linear ordinary differential equations of higher order with constant coefficients; linear second order ordinary differential equations with variable coefficients; method of Laplace transforms for solving ordinary differential equations, series solutions; Legendre and Bessel functions and their orthogonality. Algebra: Normal subgroups and homomorphism theorems, automorphisms; Group actions, Sylow’s theorems and their applications; Euclidean domains, Principle ideal domains and unique factorization domains. Prime ideals and maximal ideals in commutative rings; Fields, finite fields. Functional Analysis: Banach spaces, Hahn-Banach extension theorem, open mapping and closed graph theorems, principle of uniform boundedness; Hilbert spaces, orthonormal bases, Riesz representation theorem, bounded linear operators. Numerical Analysis: Numerical solution of algebraic and transcendental equations: bisection, secant method, Newton-Raphson method, fixed point iteration; interpolation: error of polynomial interpolation, Lagrange, Newton interpolations; numerical differentiation; numerical integration: Trapezoidal and Simpson rules, Gauss Legendre quadrature, method of undetermined parameters; least square polynomial approximation; numerical solution of systems of linear equations: direct methods (Gauss elimination, LU decomposition); iterative methods (Jacobi and Gauss-Seidel); matrix eigenvalue problems: power method, numerical solution of ordinary differential equations: initial value problems: Taylor series methods, Euler’s method, Runge-Kutta methods. Partial Differential Equations: Linear and quasilinear first order partial differential equations, method of characteristics; second order linear equations in two variables and their classification; Cauchy, Dirichlet and Neumann problems; solutions of Laplace, wave and diffusion equations in two variables; Fourier series and Fourier transform and Laplace transform methods of solutions for the above equations. Mechanics: Virtual work, Lagrange’s equations for holonomic systems, Hamiltonian equations. Topology: Basic concepts of topology, product topology, connectedness, compactness, countability and separation axioms, Urysohn’s Lemma. Probability and Statistics: Probability space, conditional probability, Bayes theorem, independence, Random variables, joint and conditional distributions, standard probability distributions and their properties, expectation, conditional expectation, moments; Weak and strong law of large numbers, central limit theorem; Sampling distributions, UMVU estimators, maximum likelihood estimators, Testing of hypotheses, standard parametric tests based on normal, X2 , t, F – distributions; Linear regression; Interval estimation. Linear programming: Linear programming problem and its formulation, convex sets and their properties, graphical method, basic feasible solution, simplex method, big-M and two phase methods; infeasible and unbounded LPP’s, alternate optima; Dual problem and duality theorems, dual simplex method and its application in post optimality analysis; Balanced and unbalanced transportation problems, u -v method for solving transportation problems; Hungarian method for solving assignment problems. Calculus of Variation and Integral Equations: Variation problems with fixed boundaries; sufficient conditions for extremum, linear integral equations of Fredholm and Volterra type, their iterative solutions.
|
| ME-Mechanical Engineering |
| ENGINEERING MATHEMATICS Linear Algebra: Matrix algebra, Systems of linear equations, Eigen values and eigen vectors. Calculus: Functions of single variable, Limit, continuity and differentiability, Mean value theorems, Evaluation of definite and improper integrals, Partial derivatives, Total derivative, Maxima and minima, Gradient, Divergence and Curl, Vector identities, Directional derivatives, Line, Surface and Volume integrals, Stokes, Gauss and Green’s theorems. Differential equations: First order equations (linear and nonlinear), Higher order linear differential equations with constant coefficients, Cauchy’s and Euler’s equations, Initial and boundary value problems, Laplace transforms, Solutions of one dimensional heat and wave equations and Laplace equation. Complex variables: Analytic functions, Cauchy’s integral theorem, Taylor and Laurent series. Probability and Statistics: Definitions of probability and sampling theorems, Conditional probability, Mean, median, mode and standard deviation, Random variables, Poisson, Normal and Binomial distributions. Numerical Methods: Numerical solutions of linear and non-linear algebraic equations Integration by trapezoidal and Simpson’s rule, single and multi-step methods for differential equations. APPLIED MECHANICS AND DESIGN Engineering Mechanics: Free body diagrams and equilibrium; trusses and frames; virtual work; kinematics and dynamics of particles and of rigid bodies in plane motion, including impulse and momentum (linear and angular) and energy formulations; impact. Strength of Materials: Stress and strain, stress-strain relationship and elastic constants, Mohr’s circle for plane stress and plane strain, thin cylinders; shear force and bending moment diagrams; bending and shear stresses; deflection of beams; torsion of circular shafts; Euler’s theory of columns; strain energy methods; thermal stresses. Theory of Machines: Displacement, velocity and acceleration analysis of plane mechanisms; dynamic analysis of slider-crank mechanism; gear trains; flywheels. Vibrations: Free and forced vibration of single degree of freedom systems; effect of damping; vibration isolation; resonance, critical speeds of shafts. Design: Design for static and dynamic loading; failure theories; fatigue strength and the S-N diagram; principles of the design of machine elements such as bolted, riveted and welded joints, shafts, spur gears, rolling and sliding contact bearings, brakes and clutches. FLUID MECHANICS AND THERMAL SCIENCES Fluid Mechanics: Fluid properties; fluid statics, manometry, buoyancy; control-volume analysis of mass, momentum and energy; fluid acceleration; differential equations of continuity and momentum; Bernoulli’s equation; viscous flow of incompressible fluids; boundary layer; elementary turbulent flow; flow through pipes, head losses in pipes, bends etc. Heat-Transfer: Modes of heat transfer; one dimensional heat conduction, resistance concept, electrical analogy, unsteady heat conduction, fins; dimensionless parameters in free and forced convective heat transfer, various correlations for heat transfer in flow over flat plates and through pipes; thermal boundary layer; effect of turbulence; radiative heat transfer, black and grey surfaces, shape factors, network analysis; heat exchanger performance, LMTD and NTU methods. Thermodynamics: Zeroth, First and Second laws of thermodynamics; thermodynamic system and processes; Carnot cycle. irreversibility and availability; behaviour of ideal and real gases, properties of pure substances, calculation of work and heat in ideal processes; analysis of thermodynamic cycles related to energy conversion. Applications: Power Engineering: Steam Tables, Rankine, Brayton cycles with regeneration and reheat. I.C. Engines: air-standard Otto, Diesel cycles. Refrigeration and air-conditioning: Vapour refrigeration cycle, heat pumps, gas refrigeration, Reverse Brayton cycle; moist air: psychrometric chart, basic psychrometric processes. Turbomachinery: Pelton-wheel, Francis and Kaplan turbines — impulse and reaction principles, velocity diagrams. MANUFACTURING AND INDUSTRIAL ENGINEERING Engineering Materials: Structure and properties of engineering materials, heat treatment, stressstrain diagrams for engineering materials. Metal Casting: Design of patterns, moulds and cores; solidification and cooling; riser and gating design, design considerations. Forming: Plastic deformation and yield criteria; fundamentals of hot and cold working processes; load estimation for bulk (forging, rolling, extrusion, drawing) and sheet (shearing, deep drawing, bending) metal forming processes; principles of powder metallurgy. Joining: Physics of welding, brazing and soldering; adhesive bonding; design considerations in welding. Machining and Machine Tool Operations: Mechanics of machining, single and multi-point cutting tools, tool geometry and materials, tool life and wear; economics of machining; principles of non-traditional machining processes; principles of work holding, principles of design of jigs and fixtures Metrology and Inspection: Limits, fits and tolerances; linear and angular measurements; comparators; gauge design; interferometry; form and finish measurement; alignment and testing methods; tolerance analysis in manufacturing and assembly. Computer Integrated Manufacturing: Basic concepts of CAD/CAM and their integration tools. Production Planning and Control: Forecasting models, aggregate production planning, scheduling, materials requirement planning. Inventory Control: Deterministic and probabilistic models; safety stock inventory control systems. Operations Research: Linear programming, simplex and duplex method, transportation, assignment, network flow models, simple queuing models, PERT and CPM. |
| MN-Mining Engineering |
| ENGINEERING MATHEMATICS Linear Algebra: Matrices and Determinants, Systems of linear equations, Eigen values and Eigen vectors. Calculus: Limit, continuity and differentiability; Partial Derivatives; Maxima and minima; Sequences and series; Test for convergence; Fourier series. Vector Calculus: Gradient; Divergence and Curl; Line; surface and volume integrals; Stokes, Gauss and Green’s theorems. Diferential Equations: Linear and non-linear first order ODEs; Higher order linear ODEs with constant coefficients; Cauchy’s and Euler’s equations; Laplace transforms; PDEs – Laplace, heat and wave equations. Probability and Statistics: Mean, median, mode and standard deviation; Random variables; Poisson, normal and binomial distributions; Correlation and regression analysis. Numerical Methods: Solutions of linear and non-linear algebraic equations; integration of trapezoidal and Simpson’s rule; single and multi-step methods for differential equations. MINING ENGINEERING Mechanics: Equivalent force systems; Equations of equilibrium; Two dimensional frames and trusses; Free body diagrams; Friction forces; Particle kinematics and dynamics. Mine Development, Geomechanics and Ground Control: Methods of access to deposits; Underground drivages; Drilling methods and machines; Explosives, blasting devices and practices. Geo-technical properties of rocks; Rock mass classification; Ground control, instrumentation and stress measurement techniques; Theories of rock failure; Ground vibrations; Stress distribution around mine openings; Subsidence; Design of supports in roadways and workings; Rock bursts and coal bumps; Slope stability. Mining Methods and Machinery: Surface mining: layout, development, loading, transportation and mechanization, continuous surface mining systems; Underground coal mining: bord and pillar systems, room and pillar mining, longwall mining, thick seam mining methods; Underground metal mining : open, supported and caved stoping methods, stope mechanization, ore handling systems, mine filling. Generation and transmission of mechanical, hydraulic and pneumatic power; Materials handling: haulages, conveyors, face and development machinery, hoisting systems, pumps. Ventilation, Underground Hazards and Surface Environment: Underground atmosphere; Heat load sources and thermal environment, air cooling; Mechanics of air flow, distribution, natural and mechanical ventilation; Mine fans and their usage; Auxiliary ventilation; Ventilation planning. Subsurface hazards from fires, explosions, gases, dust and inundation; Rescue apparatus and practices; Safety in mines, accident analysis, noise, mine lighting, occupational health and risk. Air, water and soil pollution : causes, dispersion, quality standards, reclamation and control. Surveying, Mine Planning and Systems Engineering: Fundamentals of engineering surveying; Levels and leveling, theodolite, tacheometry, triangulation, contouring, errors and adjustments, correlation; Underground surveying; Curves; Photogrammetry; Field astronomy; EDM, total station and GPS fundamentals. Principles of planning: Sampling methods and practices, reserve estimation techniques, basics of geostatistics and quality control, optimization of facility location, cash flow concepts and mine valuation, open pit design; GIS fundamentals. Work-study; Concepts of reliability, reliability of series and parallel systems. Linear programming, transportation and assignment problems, queueing, network analysis, basics of simulation. |
| MT-Metallurgical Engineering |
| ENGINEERING MATHEMATICS Linear Algebra: Matrices and Determinants, Systems of linear equations, Eigen values and Eigen vectors. Calculus: Limit, continuity and differentiability; Partial Derivatives; Maxima and minima; Sequences and series; Test for convergence; Fourier series. Vector Calculus: Gradient; Divergence and Curl; Line; surface and volume integrals; Stokes, Gauss and Green’s theorems. Diferential Equations: Linear and non-linear first order ODEs; Higher order linear ODEs with constant coefficients; Cauchy’s and Euler’s equations; Laplace transforms; PDEs – Laplace, heat and wave equations. Probability and Statistics: Mean, median, mode and standard deviation; Random variables; Poisson, normal and binomial distributions; Correlation and regression analysis. Numerical Methods: Solutions of linear and non-linear algebraic equations; integration of trapezoidal and Simpson’s rule; single and multi-step methods for differential equations. METALLURGICAL ENGINEERING Thermodynamics and Rate Processes: Laws of thermodynamics, activity, equilibrium constant, applications to metallurgical systems, solutions, phase equilibria, Ellingham and phase stability diagrams, thermodynamics of surfaces, interfaces and defects, adsorption and segregation; basic kinetic laws, order of reactions, rate constants and rate limiting steps; principles of electro chemistry- single electrode potential, electro-chemical cells and polarizations, aqueous corrosion and protection of metals, oxidation and high temperature corrosion – characterization and control; heat transfer – conduction, convection and heat transfer coefficient relations, radiation, mass transfer – diffusion and Fick’s laws, mass transfer coefficients; momentum transfer – concepts of viscosity, shell balances, Bernoulli’s equation, friction factors. Extractive Metallurgy: Minerals of economic importance, comminution techniques, size classification, Flotation, gravity and other methods of mineral processing; agglomeration, pyrohydro- and electro-metallurgical processes; material and energy balances; principles and processes for the extraction of non-ferrous metals – aluminium, copper, zinc, lead, magnesium, nickel, titanium and other rare metals; iron and steel making – principles, role structure and properties of slags, metallurgical coke, blast furnace, direct reduction processes, primary and secondary steel making, ladle metallurgy operations including deoxidation, desulphurization, sulphide shape control, inert gas rinsing and vacuum reactors; secondary refining processes including AOD, VAD, VOD, VAR and ESR; ingot and continuous casting; stainless steel making, furnaces and refractories. Physical Metallurgy: Crystal structure and bonding characteristics of metals, alloys, ceramics and polymers, structure of surfaces and interfaces, nano-crystalline and amorphous structures; solid solutions; solidification; phase transformation and binary phase diagrams; principles of heat treatment of steels, cast iron and aluminum alloys; surface treatments; recovery, recrystallization and grain growth; industrially important ferrous and non-ferrous alloys; elements of X-ray and electron diffraction; principles of scanning and transmission electron microscopy; industrial ceramics, polymers and composites; electronic basis of thermal, optical, electrical and magnetic properties of materials; electronic and opto-electronic materials. Mechanical Metallurgy: Elasticity, yield criteria and plasticity; defects in crystals; elements of dislocation theory – types of dislocations, slip and twinning, source and multiplication of dislocations, stress fields around dislocations, partial dislocations, dislocation interactions and reactions; strengthening mechanisms; tensile, fatigue and creep behaviour; super-plasticity; fracture – Griffith theory, basic concepts of linear elastic and elasto-plastic fracture mechanics, ductile to brittle transition, fracture toughness; failure analysis; mechanical testing – tension, compression, torsion, hardness, impact, creep, fatigue, fracture toughness and formability. Manufacturing Processes: Metal casting – patterns and moulds including mould design involving feeding, gating and risering, melting, casting practices in sand casting, permanent mould casting, investment casting and shell moulding, casting defects and repair; hot, warm and cold working of metals, Metal forming – fundamentals of metal forming processes of rolling, forging, extrusion, wire drawing and sheet metal forming, defects in forming; Metal joining – soldering, brazing and welding, common welding processes of shielded metal arc welding, gas metal arc welding, gas tungsten arc welding and submerged arc welding; welding metallurgy, problems associated with welding of steels and aluminium alloys, defects in welded joints; powder metallurgy; NDT using dye-penetrant, ultrasonic, radiography, eddy current, acoustic emission and magnetic particle methods. |
Mathematical Physics: Linear vector space; matrices; vector calculus; linear differential equations; elements of complex analysis; Laplace transforms, Fourier analysis, elementary ideas about tensors.
Classical Mechanics: Conservation laws; central forces, Kepler problem and planetary motion; collisions and scattering in laboratory and centre of mass frames; mechanics of system of particles; rigid body dynamics; moment of inertia tensor; noninertial frames and pseudo forces; variational principle; Lagrange’s and Hamilton’s formalisms; equation of motion, cyclic coordinates, Poisson bracket; periodic motion, small oscillations, normal modes; special theory of relativity – Lorentz transformations, relativistic kinematics, mass-energy equivalence.
Electromagnetic Theory: Solution of electrostatic and magnetostatic problems including boundary value problems; dielectrics and conductors; Biot-Savart’s and Ampere’s laws; Faraday’s law; Maxwell’s equations; scalar and vector potentials; Coulomb and Lorentz gauges; Electromagnetic waves and their reflection, refraction, interference, diffraction and polarization. Poynting vector, Poynting theorem, energy and momentum of electromagnetic waves; radiation from a moving charge.
Quantum Mechanics: Physical basis of quantum mechanics; uncertainty principle; Schrodinger equation; one, two and three dimensional potential problems; particle in a box, harmonic oscillator, hydrogen atom; linear vectors and operators in Hilbert space; angular momentum and spin; addition of angular momenta; time independent perturbation theory; elementary scattering theory.
Thermodynamics and Statistical Physics: Laws of thermodynamics; macrostates and microstates; phase space; probability ensembles; partition function, free energy, calculation of thermodynamic quantities; classical and quantum statistics; degenerate Fermi gas; black body radiation and Planck’s distribution law; Bose-Einstein condensation; first and second order phase transitions, critical point.
Atomic and Molecular Physics: Spectra of one- and many-electron atoms; LS and jj coupling; hyperfine structure; Zeeman and Stark effects; electric dipole transitions and selection rules; X-ray spectra; rotational and vibrational spectra of diatomic molecules; electronic transition in diatomic molecules, Franck-Condon principle; Raman effect; NMR and ESR; lasers.
Solid State Physics: Elements of crystallography; diffraction methods for structure determination; bonding in solids; elastic properties of solids; defects in crystals; lattice vibrations and thermal properties of solids; free electron theory; band theory of solids; metals, semiconductors and insulators; transport properties; optical, dielectric and magnetic properties of solids; elements of superconductivity.
Nuclear and Particle Physics: Nuclear radii and charge distributions, nuclear binding energy, Electric and magnetic moments; nuclear models, liquid drop model – semi-empirical mass formula, Fermi gas model of nucleus, nuclear shell model; nuclear force and two nucleon problem; Alpha decay, Beta-decay, electromagnetic transitions in nuclei; Rutherford scattering, nuclear reactions, conservation laws; fission and fusion; particle accelerators and detectors; elementary particles, photons, baryons, mesons and leptons; quark model.
Electronics: Network analysis; semiconductor devices; Bipolar Junction Transistors, Field Effect Transistors, amplifier and oscillator circuits; operational amplifier, negative feedback circuits, active filters and oscillators; rectifier circuits, regulated power supplies; basic digital logic circuits, sequential circuits, flip-flops, counters, registers, A/D and D/A conversion.
| PI-Production and Industrial Engineering |
| ENGINEERING MATHEMATICS Linear Algebra: Matrix algebra, Systems of linear equations, Eigen values and eigen vectors. Calculus: Functions of single variable, Limit, continuity and differentiability, Mean value theorems, Evaluation of definite and improper integrals, Partial derivatives, Total derivative, Maxima and minima, Gradient, Divergence and Curl, Vector identities, Directional derivatives, Line, Surface and Volume integrals, Stokes, Gauss and Green’s theorems. Differential equations: First order equations (linear and nonlinear), Higher order linear differential equations with constant coefficients, Cauchy’s and Euler’s equations, Initial and boundary value problems, Laplace transforms, Solutions of one dimensional heat and wave equations and Laplace equation. Complex variables: Analytic functions, Cauchy’s integral theorem, Taylor and Laurent series. Probability and Statistics: Definitions of probability and sampling theorems, Conditional probability, Mean, median, mode and standard deviation, Random variables, Poisson, Normal and Binomial distributions. Numerical Methods: Numerical solutions of linear and non-linear algebraic equations Integration by rapezoidal and Simpson’s rule, single and multi-step methods for differential equations. GENERAL ENGINEERING Engineering Materials: Structure and properties of engineering materials and their applications; effect of strain, strain rate and temperature on mechanical properties of metals and alloys; heat treatment of metals and alloys, its influence on mechanical properties. Applied Mechanics: Engineering mechanics – equivalent force systems, free body concepts, equations of equilibrium; strength of materials – stress, strain and their relationship, Mohr’s circle, deflection of beams, bending and shear stress, Euler’s theory of columns. Theory of Machines and Design: Analysis of planar mechanisms, cams and followers; governers and fly wheels; design of elements – failure theories; design of bolted, riveted and welded joints; design of shafts, keys, spur gears, belt drives, brakes and clutches. Thermal Engineering: Fluid mechanics – fluid statics, Bernoulli’s equation, flow through pipes, equations of continuity and momentum; thermodynamics – zeroth, first and second law of thermodynamics, thermodynamic system and processes, calculation of work and heat for systems and control volumes; air standard cycles; basics of internal combustion engines and steam turbines; heat transfer – fundamentals of conduction, convection and radiation, heat exchangers. PRODUCTION ENGINEERING Metal Casting: Casting processes – types and applications; patterns – types and materials; allowances; moulds and cores – materials, making, and testing; casting techniques of cast iron, steels and nonferrous metals and alloys; solidification; design of casting, gating and risering; casting inspection, defects and remedies. Metal Forming: Stress-strain relations in elastic and plastic deformation; concept of flow stress, deformation mechanisms; hot and cold working – forging, rolling, extrusion, wire and tube drawing; sheet metal working processes such as blanking, piercing, bending, deep drawing, coining and embossing; analysis of rolling, forging, extrusion and wire /rod drawing; metal working defects. Metal Joining Processes: Welding processes – manual metal arc, MIG, TIG, plasma arc, submerged arc, electroslag, thermit, resistance, forge, friction, and explosive welding;other joining processes – soldering, brazing, braze welding; inspection of welded joints, defects and remedies; introduction to advanced welding processes – ultrasonic, electron beam, laser beam; thermal cutting. Machining and Machine Tool Operations: Basic machine tools; machining processes-turning, drilling, boring, milling, shaping, planing, gear cutting, thread production, broaching, grinding, lapping, honing, super finishing; mechanics of machining – geometry of cutting tools, chip formation, cutting forces and power requirements, Merchant’s analysis; selection of machining parameters; tool materials, tool wear and tool life, economics of machining, thermal aspects of machining, cutting fluids, machinability; principles and applications of nontraditional machining processes – USM, AJM, WJM, EDM and Wire cut EDM, LBM, EBM, PAM, CHM, ECM. Tool Engineering: Jigs and fixtures – principles, applications, and design; press tools – configuration, design of die and punch; principles of forging die design. Metrology and Inspection: Limits, fits, and tolerances, interchangeability, selective assembly; linear and angular measurements by mechanical and optical methods, comparators; design of limit gauges; interferometry; measurement of straightness, flatness, roundness, squareness and symmetry; surface finish measurement; inspection of screw threads and gears; alignment testing of machine tools. Powder Metallurgy: Production of metal powders, compaction and sintering. Polymers and Composites: Introduction to polymers and composites; plastic processing – injection, compression and blow molding, extrusion, calendaring and thermoforming; molding of composites. Manufacturing Analysis: Sources of errors in manufacturing; process capability; tolerance analysis in manufacturing and assembly; process planning; parameter selection and comparison of production alternatives; time and cost analysis; manufacturing technologies – strategies and selection. Computer Integrated Manufacturing: Basic concepts of CAD, CAM, CAPP, cellular manufacturing, NC, CNC, DNC, Robotics, FMS, and CIM. INDUSTRIAL ENGINEERING Product Design and Development: Principles of good product design, tolerance design; quality and cost considerations; product life cycle; standardization, simplification, diversification, value engineering and analysis, concurrent engineering. Engineering Economy and Costing: Elementary cost accounting and methods of depreciation; break-even analysis, techniques for evaluation of capital investments, financial statements. Work System Design: Taylor’s scientific management, Gilbreths’s contributions; productivity – concepts and measurements; method study, micro-motion study, principles of motion economy; work measurement – stop watch time study, work sampling, standard data, PMTS; ergonomics; job evaluation, merit rating, incentive schemes, and wage administration; business process reengineering. Facility Design: Facility location factors and evaluation of alternate locations; types of plant layout and their evaluation; computer aided layout design techniques; assembly line balancing; materials handling systems. Production Planning and Inventory Control: Forecasting techniques – causal and time series models, moving average, exponential smoothing, trend and seasonality; aggregate production planning; master production scheduling; MRP and MRP-II; order control and flow control; routing, scheduling and priority dispatching; push and pull production systems, concept of JIT manufacturing system; logistics, distribution, and supply chain management; Inventory – functions, costs, classifications, deterministic and probabilistic inventory models, quantity discount; perpetual and periodic inventory control systems. Operation Research: Linear programming – problem formulation, simplex method, duality and sensitivity analysis; transportation and assignment models; network flow models, constrained optimization and Lagrange multipliers; simple queuing models; dynamic programming; simulation – manufacturing applications; PERT and CPM, time-cost trade-off, resource leveling. Quality Management: Quality – concept and costs, quality circles, quality assurance; statistical quality control, acceptance sampling, zero defects, six sigma; total quality management; ISO 9000; design of experiments – Taguchi method. Reliability and Maintenance: Reliability, availability and maintainability; distribution of failure and repair times; determination of MTBF and MTTR, reliability models; system reliability determination; preventive maintenance and replacement, total productive maintenance – concept and applications. Management Information System: Value of information; information storage and retrieval system – database and data structures; knowledge based systems. Intellectual Property System: Definition of intellectual property, importance of IPR; TRIPS and its implications, patent, copyright, industrial design and trademark. |
..
|
|
| XE-Engineering Sciences |
| SECTION A. ENGINEERING MATHEMATICS (Compulsory) Linear Algebra: Algebra of matrices, inverse, rank, system of linear equations, symmetric, skewsymmetric and orthogonal matrices. Hermitian, skew-Hermitian and unitary matrices. eigenvalues and eigenvectors, diagonalisation of matrices, Cayley-Hamilton Theorem. Calculus: Functions of single variable, limit, continuity and differentiability, Mean value theorems, Indeterminate forms and L’Hospital rule, Maxima and minima, Taylor’s series, Fundamental and mean value-theorems of integral calculus. Evaluation of definite and improper integrals, Beta and Gamma functions, Functions of two variables, limit, continuity, partial derivatives, Euler’s theorem for homogeneous functions, total derivatives, maxima and minima, Lagrange method of multipliers, double and triple integrals and their applications, sequence and series, tests for convergence, power series, Fourier Series, Half range sine and cosine series. Complex variable: Analytic functions, Cauchy-Riemann equations, Application in solving potential problems, Line integral, Cauchy’s integral theorem and integral formula (without proof), Taylor’s and Laurent’ series, Residue theorem (without proof) and its applications. Vector Calculus: Gradient, divergence and curl, vector identities, directional derivatives, line, surface and volume integrals, Stokes, Gauss and Green’s theorems (without proofs) applications. Ordinary Differential Equations: First order equation (linear and nonlinear), Second order linear differential equations with variable coefficients, Variation of parameters method, higher order linear differential equations with constant coefficients, Cauchy- Euler’s equations, power series solutions, Legendre polynomials and Bessel’s functions of the first kind and their properties. Partial Differential Equations: Separation of variables method, Laplace equation, solutions of one dimensional heat and wave equations. Probability and Statistics: Definitions of probability and simple theorems, conditional probability, Bayes Theorem, random variables, discrete and continuous distributions, Binomial, Poisson, and normal distributions, correlation and linear regression. Numerical Methods: Solution of a system of linear equations by L-U decomposition, Gauss- Jordan and Gauss-Seidel Methods, Newton’s interpolation formulae, Solution of a polynomial and a transcendental equation by Newton-Raphson method, numerical integration by trapezoidal rule, Simpson’s rule and Gaussian quadrature, numerical solutions of first order differential equation by Euler’s method and 4th order Runge-Kutta method. SECTION B. COMPUTATIONAL SCIENCE Numerical Methods: Truncation errors, round off errors and their propagation; Interpolation: Lagrange, Newton’s forward, backward and divided difference formulas, Least square curve fitting; Solutions of non linear equations of one variable using bisection, false position, Secant and Newton Raphson methods, Rate of convergence of these methods, general iterative methods, Simple and multiple roots of polynomials; Solutions of system of linear algebraic equations using Gauss elimination methods, Jacobi and Gauss – Seidel iterative methods and their rate of convergence; Ill conditioned and well conditioned system, Eigen values and Eigen vectors using power methods; Numerical integration using trapezoidal, Simpson’s rule and other quadtrature formulas; Numerical Differentiation; Solution of boundary value problems; Solution of initial value problems of ordinary differential equations using Euler’s method, predictor corrector and Runge Kutta method. Computer System Concepts: Representation of fixed- and floating-point numbers; Elementary concepts and terminology of basic building blocks of a computer system and system software. Fortran: Fortran-90 for Numerical Computation: Basic data types including complex numbers; Arrays; Assignment statements; Structured Programming Constructs: Loops, Conditional execution, iteration and recursion; Functions and subroutines; Structured programming SECTION D. FLUID MECHANICS Fluid Properties: Relation between stress and strain rate for Newtonian fluids. Hydrostatics: Buoyancy, manometry, forces on submerged bodies. Eulerian and Lagrangian description of fluid motion, concept of local and convective accelerations, steady and unsteady flows, control volume analysis for mass, momentum and energy. Differential equations of mass and momentum (Euler equation), Bernoulli’s equation and its applications. Concept of fluid rotation, vorticity, stream function and potential function. Potential flow: elementary flow fields and principle of superposition, potential flow past a circular cylinder. Dimensional analysis: Concept of geometric, kinematic and dynamic similarity, importance of non-dimensional numbers. Fully-developed pipe flow, laminar and turbulent flows, friction factor, Darcy-Weisbach relation. Qualitative ideas of boundary layer and separation, streamlined and bluff bodies, drag and lift forces. Basic ideas of flow measurement using venturimeter, pitot-static tube and orifice plate. SECTION E. MATERIALS SCIENCEM Structure: Atomic structure and bonding in materials. Crystal structure of materials, crystal systems, unit cells and space lattices, determination of structures of simple crystals by x-ray diffraction, miller indices of planes and directions, packing geometry in metallic, ionic and covalent solids. Concept of amorphous, single and polycrystalline structures and their effect on properties of materials. Crystal growth techniques. Imperfections in crystalline solids and their role in influencing various properties. Diffusion: Fick’s laws and application of diffusion in sintering, doping of semiconductors and surface hardening of metals. Metals and Alloys: Solid solutions, solubility limit, phase rule, binary phase diagrams, intermediate phases, intermetallic compounds, iron-iron carbide phase diagram, heat treatment of steels, cold, hot working of metals, recovery, recrystallization and grain growth. Microstrcture, properties and applications of ferrous and non-ferrous alloys. Ceramics: Structure, properties, processing and applications of traditional and advanced ceramics. Polymers: Classification, polymerization, structure and properties, additives for polymer products, processing and applications. Composites: Properties and applications of various composites. Advanced Materials and Tools: Smart materials, exhibiting ferroelectric, piezoelectric, optoelectric, semiconducting behavior, lasers and optical fibers, photoconductivity and superconductivity, nanomaterials – synthesis, properties and applications, biomaterials, superalloys, shape memory alloys. Materials characterization techniques such as, scanning electron microscopy, transmission electron microscopy, atomic force microscopy, scanning tunneling microscopy, atomic absorption spectroscopy, differential scanning calorimetry. Mechanical Properties: stress-strain diagrams of metallic, ceramic and polymeric materials, modulus of elasticity, yield strength, tensile strength, toughness, elongation, plastic deformation, viscoelasticity, hardness, impact strength, creep, fatigue, ductile and brittle fracture. Thermal Properties: Heat capacity, thermal conductivity, thermal expansion of materials. Electronic Properties: Concept of energy band diagram for materials – conductors, semiconductors and insulators, electrical conductivity – effect of temperature on conductility, intrinsic and extrinsic semiconductors, dielectric properties. Optical Properties: Reflection, refraction, absorption and transmission of electromagnetic radiation in solids. Magnetic Properties: Origin of magnetism in metallic and ceramic materials, paramagnetism, diamagnetism, antiferro magnetism, ferromagnetism, ferrimagnetism, magnetic hysterisis. Environmental Degradation: Corrosion and oxidation of materials, prevention. SECTION F. SOLID MECHANICS Equivalent force systems; free-body diagrams; equilibrium equations; analysis of determinate trusses and frames; friction; simple relative motion of particles; force as function of position, time and speed; force acting on a body in motion; laws of motion; law of conservation of energy; law of conservation of momentum. Stresses and strains; principal stresses and strains; Mohr’s circle; generalized Hooke’s Law; thermal strain; theories of failure. Axial, shear and bending moment diagrams; axial, shear and bending stresses; deflection (for symmetric bending); torsion in circular shafts; thin cylinders; energy methods (Castigliano’s Theorems); Euler buckling. Free vibration of single degree of freedom systems. SECTION G. THERMODYNAMICS Basic Concepts: Continuum, macroscopic approach, thermodynamic system (closed and open or control volume); thermodynamic properties and equilibrium; state of a system, state diagram, path and process; different modes of work; Zeroth law of thermodynamics; concept of temperature; heat. First Law of Thermodynamics: Energy, enthalpy, specific heats, first law applied to systems and control volumes, steady and unsteady flow analysis. Second Law of Thermodynamics: Kelvin-Planck and Clausius statements, reversible and irreversible processes, Carnot theorems, thermodynamic temperature scale, Clausius inequality and concept of entropy, principle of increase of entropy; availability and irreversibility. Properties of Pure Substances: Thermodynamic properties of pure substances in solid, liquid and vapor phases, P-V-T behaviour of simple compressible substances, phase rule, thermodynamic property tables and charts, ideal and real gases, equations of state, compressibility chart. Thermodynamic Relations: T-ds relations, Maxwell equations, Joule-Thomson coefficient, coefficient of volume expansion, adiabatic and isothermal compressibilities, Clapeyron equation. Thermodynamic cycles: Carnot vapor power cycle, Ideal Rankine cycle, Rankine Reheat cycle, Air standard Otto cycle, Air standard Diesel cycle, Air-standard Brayton cycle, Vapor-compression refrigeration cycle. Ideal Gas Mixtures: Dalton’s and Amagat’s laws, calculations of properties, air-water vapor mixtures and simple thermodynamic processes involving them. XL-Life Sciences SECTION H. CHEMISTRY (Compulsory) Atomic structure and periodicity: Planck’s quantum theory, wave particle duality, uncertainty principle, quantum mechanical model of hydrogen atom; electronic configuration of atoms; periodic table and periodic properties; ionization energy, election affinity, electronegativity, atomic size. Structure and bonding: Ionic and covalent bonding, M.O. and V.B. approaches for diatomic molecules, VSEPR theory and shape of molecules, hybridisation, resonance, dipole moment, structure parameters such as bond length, bond angle and bond energy, hydrogen bonding, van der Waals interactions. Ionic solids, ionic radii, lattice energy (Born-Haber Cycle). s.p. and d Block Elements: Oxides, halides and hydrides of alkali and alkaline earth metals, B, Al, Si, N, P, and S, general characteristics of 3d elements, coordination complexes: valence bond and crystal field theory, color, geometry and magnetic properties. Chemical Equilibria: Colligative properties of solutions, ionic equilibria in solution, solubility product, common ion effect, hydrolysis of salts, pH, buffer and their applications in chemical analysis, equilibrium constants (Kc, Kp and Kx) for homogeneous reactions, Electrochemistry: Conductance, Kohlrausch law, Half Cell potentials, emf, Nernst equation, galvanic cells, thermodynamic aspects and their applications. Reaction Kinetics: Rate constant, order of reaction, molecularity, activation energy, zero, first and second order kinetics, catalysis and elementary enzyme reactions. Thermodynamics: First law, reversible and irreversible processes, internal energy, enthalpy, Kirchoff’s equation, heat of reaction, Hess law, heat of formation, Second law, entropy, free energy, and work function. Gibbs-Helmholtz equation, Clausius-Clapeyron equation, free energy change and equilibrium constant, Troutons rule, Third law of thermodynamics. Basis of Organic Reactions Mechanism: Elementary treatment of SN1, SN2, E1 and E2 reactions, Hoffmann and Saytzeff rules, Addition reactions, Markonikoff rule and Kharash effect, Diels-Alder reaction, aromatic electrophilic substitution, orientation effect as exemplified by various functional groups. Identification of functional groups by chemical tests Structure-Reactivity Correlations: Acids and bases, electronic and steric effects, optical and geometrical isomerism, tautomerism, conformers, concept of aromaticity SECTION I. BIOCHEMISTRY Organization of life. Importance of water. Cell structure and organelles. Structure and function of biomolecules: Amino acids, Carbohydrates, Lipids, Proteins and Nucleic acids. Biochemical separation techniques and characterization: ion exchange, size exclusion and affinity chromatography, electrophoresis, UV-visible, fluorescence and Mass spectrometry. Protein structure, folding and function: Myoglobin, Hemoglobin, Lysozyme, Ribonuclease A, Carboxypeptidase and Chymotrypsin. Enzyme kinetics including its regulation and inhibition, Vitamins and Coenzymes. Metabolism and bioenergetics. Generation and utilization of ATP. Metabolic pathways and their regulation: glycolysis, TCA cycle, pentose phosphate pathway, oxidative phosphorylation, gluconeogenesis, glycogen and fatty acid metabolism. Metabolism of Nitrogen containing compounds: nitrogen fixation, amino acids and nucleotides. Photosynthesis: the Calvin cycle. Biological membranes. Transport across membranes. Signal transduction; hormones and neurotransmitters. DNA replication, transcription and translation. Biochemical regulation of gene expression. Recombinant DNA technology and applications: PCR, site directed mutagenesis and DNAmicroarray. Immune system. Active and passive immunity. Complement system. Antibody structure, function and diversity. Cells of the immune system: T, B and macrophages. T and B cell activation. Major histocompatibilty complex. T cell receptor. Immunological techniques: Immunodiffusion, immunoelectrophoresis, RIA and ELISA. SECTION J. BIOTECHNOLOGY Advanced techniques in gene expression and analysis: PCR and RT-PCR, microarray technology, DNA fingerprinting and recombinant DNA technology; prokaryotic and eukaryotic expression systems; Vectors: plasmids, phages, cosmids and BAC. Architecture of plant genome; plant tissue culture techniques; methods of gene transfer into plant cells and development of transgenic plants; manipulation of phenotypic traits in plants; plant cell fermentations and production of secondary metabolites using suspension/immobilized cell culture; expression of animal protein in plants; genetically modified crops. Animal cell metabolism and regulation; cell cycle; primary cell culture; nutritional requirements for animal cell culture; techniques for mass culture of animal cell lines; application of animal cell culture for production of vaccines, growth hormones; interferons, cytokines and therapeutic proteins; hybridoma technology and gene knockout; stem cells and its application in organ synthesis; gene therapy; transgenic animals and molecular pharming. Industrial bioprocesses: microbial production of organic acids, amino acids, proteins, polysaccharides, lipids, polyhydroxyalkanoates, antibiotics and pharmaceuticals; methods and applications of immobilization of cells and enzymes; kinetics of soluble and immobilized enzymes; biosensors; biofuels; biopesticides; environmental bioremediation. Microbial growth kinetics; batch, fed-batch and continuous culture of microbial cells; media for industrial fermentations; sterilization of air and media, design and operation of stirred tank, airlift, plug flow, packed bed, fluidized bed, membrane and hollow fibre reactors; aeration and agitation in aerobic fermentations; bioprocess calculations based on material and energy balance; Down stream processing in industrial biotechnology: filtration, precipitation, centrifugation, cell disintegration, solvent extraction, and chromatographic separations, membrane filtration, aqueous two phase separation. Bioinformatics; genomics; proteomics and computational biology. SECTION K. BOTANY Plant Systematics: Systems of classification (non-phylogenetic vs. phylogenetic – outline), plant groups, molecular systematics. Plant Anatomy: Plant cell structure, organization, organelles, cytoskeleton, cell wall and membranes; anatomy of root, stem and leaves, meristems, vascular system, their ontogeny, structure and functions, secondary growth in plants and stellar organization. Morphogenesis & Development: Cell cycle, cell division, life cycle of an angiosperm, pollination, fertilization, embryogenesis, seed formation, seed storage proteins, seed dormancy and germination. Concept of cellular totipotency, clonal propagation; organogenesis and somatic embryogenesis, artificial seed, somaclonal variation, secondary metabolism in plant cell culture, embryo culture, in vitro fertilization. Physiology and Biochemistry: Plant water relations, transport of minerals and solutes, stress physiology, stomatal physiology, signal transduction, N2 metabolism, photosynthesis, photorespiration; respiration, Flowering: photoperiodism and vernalization, biochemical mechanisms involved in flowering; molecular mechanism of senencensce and aging, biosynthesis, mechanism of action and physiological effects of plant growth regulators, structure and function of biomolecules, (proteins, carbohydrates, lipids, nucleic acid), enzyme kinetics. Genetics: Principles of Mendelian inheritance, linkage, recombination, genetic mapping; extrachromosomal inheritance; prokaryotic and eukaryotic genome organization, regulation of gene expression, gene mutation and repair, chromosomal aberrations (numerical and structural), transposons. Plant Breeding and Genetic Modification: Principles, methods – selection, hybridization, heterosis; male sterility, genetic maps and molecular markers, sporophytic and gametophytic self incompability, haploidy, triploidy, somatic cell hybridization, marker-assisted selection, gene transfer methods viz. direct and vector-mediated, plastid transformation, transgenic plants and their application in agriculture, molecular pharming, plantibodies. Economic Botany: A general account of economically and medicinally important plants- cereals, pulses, plants yielding fibers, timber, sugar, beverages, oils, rubber, pigments, dyes, gums, drugs and narcotics. Economic importance of algae, fungi, lichen and bacteria. Plant Pathology: Nature and classification of plant diseases, diseases of important crops caused by fungi, bacteria and viruses, and their control measures, mechanism(s) of pathogenesis and resistance, molecular detection of pathogens; plant-microbe beneficial interactions. Ecology and Environment: Ecosystems – types, dynamics, degradation, ecological succession; food chains and energy flow; vegetation types of the world, pollution and global warming, speciation and extinction, conservation strategies, cryopreservation, phytoremediation. SECTION L. MICROBIOLOGY Historical Perspective: Discovery of microbial world; Landmark discoveries relevant to the field of microbiology; Controversy over spontaneous generation; Role of microorganisms in transformation of organic matter and in the causation of diseases. Methods in Microbiology: Pure culture techniques; Theory and practice of sterilization; Principles of microbial nutrition; Enrichment culture techniques for isolation of microorganisms; Light-, phase contrast- and electron-microscopy. Microbial Taxonomy and Diversity: Bacteria, Archea and their broad classification; Eukaryotic microbes: Yeasts, molds and protozoa; Viruses and their classification; Molecular approaches to microbial taxonomy. Prokaryotic and Eukaryotic Cells: Structure and Function: Prokaryotic Cells: cell walls, cell membranes, mechanisms of solute transport across membranes, Flagella and Pili, Capsules, Cell inclusions like endospores and gas vesicles; Eukaryotic cell organelles: Endoplasmic reticulum, Golgi apparatus, mitochondria and chloroplasts. Microbial Growth: Definition of growth; Growth curve; Mathematical expression of exponential growth phase; Measurement of growth and growth yields; Synchronous growth; Continuous culture; Effect of environmental factors on growth. Control of Micro-organisms: Effect of physical and chemical agents; Evaluation of effectiveness of antimicrobial agents. Microbial Metabolism: Energetics: redox reactions and electron carriers; An overview of metabolism; Glycolysis; Pentose-phosphate pathway; Entner-Doudoroff pathway; Glyoxalate pathway; The citric acid cycle; Fermentation; Aerobic and anaerobic respiration; Chemolithotrophy; Photosynthesis; Calvin cycle; Biosynthetic pathway for fatty acids synthesis; Common regulatory mechanisms in synthesis of amino acids; Regulation of major metabolic pathways. Microbial Diseases and Host Pathogen Interaction: Normal microbiota; Classification of infectious diseases; Reservoirs of infection; Nosocomial infection; Emerging infectious diseases; Mechanism of microbial pathogenicity; Nonspecific defense of host; Antigens and antibodies; Humoral and cell mediated immunity; Vaccines; Immune deficiency; Human diseases caused by viruses, bacteria, and pathogenic fungi. Chemotherapy/Antibiotics: General characteristics of antimicrobial drugs; Antibiotics: Classification, mode of action and resistance; Antifungal and antiviral drugs. Microbial Genetics: Types of mutation; UV and chemical mutagens; Selection of mutants; Ames test for mutagenesis; Bacterial genetic system: transformation, conjugation, transduction, recombination, plasmids, transposons; DNA repair; Regulation of gene expression: repression and induction; Operon model; Bacterial genome with special reference to E.coli; Phage λ and its life cycle; RNA phages; RNA viruses; Retroviruses; Basic concept of microbial genomics. Microbial Ecology: Microbial interactions; Carbon, sulphur and nitrogen cycles; Soil microorganisms associated with vascular plants. SECTION M. ZOOLOGY Animal world: Animal diversity, distribution, systematics and classification of animals, phylogenetic relationships. Evolution: Origin and history of life on earth, theories of evolution, natural selection, adaptation, speciation. Genetics: Principles of inheritance, molecular basis of heredity, mutations, cytoplasmic inheritance, linkage and mapping of genes. Biochemistry and Molecular Biology: Nucleic acids, proteins, lipids and carbohydrates; replication, transcription and translation; regulation of gene expression, organization of genome, Kreb’s cycle, glycolysis, enzyme catalysis, hormones and their actions, vitamins. Cell Biology: Structure of cell, cellular organelles and their structure and function, cell cycle, cell division, chromosomes and chromatin structure. Eukaryotic gene organization and expression (Basic principles of signal transduction). Animal Anatomy and Physiology: Comparative physiology, the respiratory system, circulatory system, digestive system, the nervous system, the excretory system, the endocrine system, the reproductive system, the skeletal system, osmoregulation. Parasitology and Immunology: Nature of parasite, host-parasite relation, protozoan and helminthic parasites, the immune response, cellular and humoral immune response, evolution of the immune system. Development Biology: Embryonic development, cellular differentiation, organogenesis, metamorphosis, genetic basis of development, stem cells. Ecology: The ecosystem, habitats, the food chain, population dynamics, species diversity, zoogerography, biogeochemical cycles, conservation biology. Animal Behaviour: Types of behaviours, courtship, mating and territoriality, instinct, learning and memory, social behaviour across the animal taxa, communication, pheromones, evolution of animal behaviour. |
No comments:
Post a Comment